 |
| Ancestors at rest, this marble stone had become
badly worn over time with text now barely legible or missing. Fortunately it
was transcribed decades earlier.
NGS recently posted the question on their Facebook page, “Are you an expert on gravestones & preservation? Is using
flour (as shown in this
video) recommended? If not, what is the "current" Best Practice
for helping us better read worn tombstones?”
Flour is NOT recommended for reading
cemetery markers. Flour contains starches and protein. Any deposit that could
become “food” for biological growth is not recommended. Just as we eat flour,
other forms of life can feed on flour.
The best practice for reading cemetery markers that are
difficult to interpret, is to use a mirror. The lighting created from a mirror
across the face of a marker highlights the raised areas to contrast the insets and
make the text more visible. The mirror allows better reading of the inscription
and for photographing the marker. The sun can do the same thing, provided that
you are at the cemetery at the right time for the sun to give a soft light
across the marker’s face. The mirror can be used on a cloudy day as well,
although the light will not be as prominent.
The most important thing to keep in mind when working with cemetery stones is that most of the old markers are sedimentary rock. Sediment is formed by deposits of minerals, such as calcite, and organisms, such as coral. The longer the sediment is placed under pressure, the harder and stronger the stone can become. The stone you are left with could be limestone, marble, sandstone, shale, slate, etc. This is unlike granite, which we are used to seeing these days. Granite is cut with a laser. Softer stone such as limestone and marble was utilized during the early stages of our nation, as stone masons could carve it with hand tools. When sedimentary rock is exposed to the weather it slowly erodes, basically a reversal of the process from which it was created. When we humans apply any liquid, solid, or pressure to the stone, we in turn are essentially assisting in this reversal process. While most applications of liquid are unnoticeable, we are none the less helping the marker erode. Most cemetery enthusiasts are insistent that the information on the markers is very important for research purposes, which it is. We must also keep in mind that the rules of working around cemetery stones are do NO harm and NEVER do any work that cannot be undone. Liquids should not be applied to cemetery markers with a few exceptions. First, inspect the integrity of the marker. If it is crumbling, don’t touch it! If the stone is of sound condition and not going to tip over, water can be applied. If further cleaning needs to be done, use a neutral pH cleaner, such as D/2, which has been used by the National Park
Service and is recommended by the NCPTT. Cleaning should not be done often, for
reasons stated above. While a lot of people love to see a stone in pristine
condition, remember the stones are not brand new, they are older than we are!
Also, algae are not always bad for cemetery markers and more harm could be done
by removing present growth. Again, it depends on the integral condition of the
stone.
Using the application of any chemical or compound is a last
resort only. Cases where this would be applicable are if the stone in question
has never been transcribed or photographed. To perform a diligent search, you
can question the caretaker or record holder of the cemetery, the local library,
genealogical society, or perhaps even a state repository. Check with nearby
residents who may have researched the deceased or perhaps are related to the
deceased. Also, use the information on surrounding stones to search for
relatives. This can often be done through online sources. Make sure you get
permission from the cemetery and from the family of the deceased.
Learn all you can about cemetery preservation methods. Join
a cemetery preservation group or attend a cemetery workshop by a reputable
preservationist. This is the best way to receive hands on experience to preserve
cemetery markers. Only then can you make the call as to whether the information
on the stone is important enough to lose the integrity of the stone. The future
generations may wonder what the cemetery stones looked like. Will they be able
to find photos and documentation to answer their questions? Always ask
yourself, “How long do I want this stone to survive”?
~~~~~~~~~~~~~~~~~~~~~
Want to learn
more about interacting with the blog, please read Hyperlinks, Subscribing and Comments -- How to Interact with
Upfront with NGS Blog posts!
~~~~~~~~~~~~~~~~~~~~~
NGS does not
imply endorsement of any outside advertiser or other vendors appearing in this
blog. Any opinions expressed by guest authors are their own and do not
necessarily reflect the view of NGS.
~~~~~~~~~~~~~~~~~~~~~
Republication
of UpFront articles is permitted and encouraged for
non-commercial purposes without express permission from NGS. Please drop us a
note telling us where and when you are using the article. Express written
permission is required if you wish to republish UpFront articles
for commercial purposes. You may send a request for express written permission
to [email protected]. All
republished articles may not be edited or reworded and must contain the copyright
statement found at the bottom of each UpFront article.
~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~
Think your
friends, colleagues, or fellow genealogy researchers would find this blog post
interesting? If so, please let them know that anyone can read past UpFront with
NGS posts or subscribe!
~~~~~~~~~~~~~~~~~~~~~
Suggestions
for topics for future UpFront with NGS posts are always welcome. Please
send any suggested topics to [email protected]
|
04 March 2014
How to read the unreadable Gravestone Headstone Tombstone Grave Marker Cemetery Stone, guest post by Anthony Bengston
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment